HDBH HDBHDC3BAEXA
- Each single valve in the HDBH Series system is equipped with an inductive position switch.
- Monitoring of these switches is to be done by an electrical safety control system.
- Redundant spool type valve system.
- Special tamper resistant tool required for disassembly.
- Mounts between manifold and directional valve.
- Flow doubling available in applications where higher flows are needed.
- Spacer kits are available to avoid interference with other devices on the manifold.
Product Information
| Safety Function | Dual Block & Stop |
| Valve Type | Directional Control |
| Series | HDBH Series |
| Construction | Redundant Spool |
| ISO Size | D03 |
| Length | 10.0 in (255 mm) |
| Length (mm) | 255 |
| Width | 3.9 in (100 mm) |
| Width (mm) | 100 |
| Height | 3.4 in (87 mm) |
| Height (mm) | 87 |
| Weight | 15.0 lb (6.80 kg) |
| Weight (kg) | 6.8 |
| Flow Rate (gpm) | 5 to 10 |
| Mounting | Base Mount |
| Actuation | Electrical |
| Valve Function | Dual 4/2 Single Solenoid |
| Monitoring | External |
| Return | Spring |
| Voltage | 24 VDC |
| Duty Cycle | Continuous Duty |
| Power Consumption | 30 watts |
| Solenoid Connection Type | EN 175301-803 Form A |
| Inductive Position Switch | PNP |
| Current Consumption (Max) | 400mA maximum |
| Ambient Temperature | -4 to 160 F (-20 to 71 C) |
| Ambient Temperature (Celsius) | -20 to 71 |
| Media Temperature | -4 to 140 F (-20 to 60 C) |
| Media Temperature | -20 to 60 |
| Operating Pressure - Ports P, A, B (Max) | 5000 psi (344 bar) |
| Operating Pressure - Ports P, A, B (Max bar) | 344 |
| Operating Pressure - Port T (Max) | 3000 psi (210 bar) |
| Operating Pressure - Port T (Max bar) | 210 |
| Flow Media | Mineral Oil HLP, HL-DIN 51524; Vegetable Oil HETG - VMDA 24568 |
| Valve Body & Manifold Material | Cast Steel |
| Spool Material | Steel |
| Seal Material | Buna-N |
+
HDBH
HDBHDC3BAEXA
Contact Us for a 3D Model
+
HDBH
HDBHDC3BAEXA
Contact ROSS Controls for Ordering Information
+
