What
is an ANSI valve?
A base-mount valve that conforms to the ANSI
standard.
How
do I convert my ANSI valve to external pilot supply?
See Bulletin
331G "Service and Installation Manual" for instructions.
Can
I plug port numbers Y-14 and Y-12 on my ANSI base?
No, these are the pilot exhaust ports.
What
do the numbers 1, 2, 3, 4 and 5 mean on my base?
These are port markings.
- 1
is the inlet or supply port.
- 2
is an outlet port.
- 3
is an exhaust port.
- 4
is an outlet port.
- 5
is an exhaust port.
How
do I order my ANSI Size-1 or -2 valves with lights?
The pilot indicator lights on the ANSI size 1 and 2 are available
in the base or manifold. Be sure to order a base or manifold
with lights included.
How
do I hook up the wires on my ANSI valve?
The ANSI valve has two sets of wires, two are black and two
are white. The two black wires go to the control 14 pilot
and the two white wires go to the control 12 pilot. If you
have a single solenoid valve, you only need the two black
wires. This information is also inside the conduit cover of
the ANSI base or manifold.
