.jpg)
ROSS CONTROLS® is proud to introduce its new line of DM2™C Crossflow™ SERPAR® Double Valves with TOTAL Dynamic Monitoring & Memory for Category-3 & -4 Machine Guarding applications.
ROSS’ newDM2™Cpneumatic safety valves meet all ANSI requirements for machine safety, including the Z244 lock-out, B11.19 machine guarding, and B155 packaging standards. TheDM2™Calso meets stop-time requirements, and is Category-4, third party certified. Safety systems do not end at the wire!
Memory, monitoring, and air-flow control functions are simply integrated into two identical valve elements. DM2™Cvalves lock out due to asynchronous movement of valve elements during actuation or de-actuation, resulting in a residual outlet pressure of less than 1% of supply. Overt action is required for reset, and reset can only be accomplished by applying a remote air signal or by energizing the optional integrated electrical (solenoid) reset.
TheDM2™Cvalves are base mounted, and available with BSPP or NPT pipe threads. Inlet and outlet ports on both sides of the bases provide for flexibility in piping. These newDM2™CValves are available in 4 sizes, providing a broad range of flow capabilities to meet your needs. Valves are designated by the nominal sizes 4, 8, 12, and 30 with outlet ports up to 2”.
As a standard feature, the Status Indicator includes a pressure switch with both normally open and normally closed contacts to provide status feedback to the safety control system indicating whether the valve is in the lock-out or ready-to-run condition. Also, all models include a high flow, clog resistant silencer.
For more information or for a free brochure about theDM2™CCrossflow™ SERPAR® Double Valves, contact:
ROSS CONTROLS®
Customer Service
800-438-7677 (in the U.S.) or 706-356-3708 (outside the U.S.)
E-mail: Customer Service
